Product description: Single component, wet curing, no flow during facade construction; elastic, good initial adhesion, medium strength; good adhesion to glass, aluminum plate and other materials; good caulking performance; short wire drawing when discontinuing glue application; no corrosion to substrate, no penetration pollution; low volatile odor; excellent anti-aging performance; can be colored and sanded

Product application range: Can be used for bonding of vehicle windshields and side windows in the auto repair market, sealing of welding seams of refrigerated compartments, glass curtain walls, etc.; can be used for body seam sealing, glass caulking sealing, compartment sealing and other general gap sealing. Can be used for seam sealing of containers, vans, mobile houses, and bonding between steel and aluminum. Can be used for visible parts of the body and general seam sealing of various vehicles, such as skirts, luggage compartment covers, bottom and roof of the vehicle, air conditioners, etc.

Note: After opening, it should be used up on the same day, otherwise it needs to be strictly sealed and stored; the best construction conditions are 15-35℃ and 55%-75%RH; when the ambient temperature is lower than 10℃ or the glue output speed does not meet the process requirements, it is recommended to bake in a 40℃ oven for at least 30 minutes. After the glue is applied, it needs to be left to stand for 4-8 hours. After it has fully solidified, high-temperature baking paint and other work can be carried out. Uncured glue cannot come into contact with solvents containing alcohols, otherwise it will cause the glue to not solidify for a long time.

Packaging and storage: Aluminum tube packaging: 310ml; 20 pieces/box; limited to 6 months. It is recommended to be stored in a dry warehouse below 25℃ to avoid high temperature/water vapor.